NTR and Cubic Ninja

Required Reading

To use the magnet links on this page, you will need a torrent client like Deluge.

NTR Cubic Ninja will work for JPN New 3DS ONLY!

What You Need

操作步骤

Section I - Prep Work

  1. 安装WAMP到默认目录
  2. Copy the contents of 3ds-private-update-server.zip to C:\wamp\www\ (overwrite any existing files)
  3. Copy update.php to C:\wamp\www\ (overwrite any existing files)
  4. 解压缩9.2.0降级压缩包，复制updates文件夹到C:\wamp\www\
  5. 移动node.exe到C:\wamp\www\updates
  6. 移动C:\wamp\www\CdnCiaUnpack.js到C:\wamp\www\update
  7. 在C:\wamp\www\updates目录下，拖动CdnCiaUnpack.js到node.exe程序上，获得GetSystemUpdate.partial.xml
  8. 将node.exe和CdnCiaUnpack.js移动回C:\wamp\www\
  9. 复制GetSystemUpdate.partial.xml到C:\wamp\www\（这样C:\wamp\www\updates和C:\wamp\www\下会有两份拷贝）
  10. 单击系统状态栏上的WAMP图标，选择”Put Online”
  11. 在CMD中输入ipconfig/all命令，获取你的电脑的IPv4地址。你很快会用到
  12. 复制 ntr.bin 到你的SD卡根目录
  13. Copy boot.3dsx to the root of your SD card
  14. Put your SD card back into your device

Section II - Updating

  1. Boot your device into recovery mode by holding (L)+(R)+(A)+(UP) while powering on
  2. 取消升级，并重启
  3. Launch Cubic Ninja (if it already has NinjHax installed, hold (L)+(R)+(X)+(Y) to reset it)
  4. 依次选择”Create”，”QR Code”，”Scan QR Code”
  5. 扫描NTR CFW压缩包中对应你区域的二维码
  6. On the home menu, press (Y) and (X) at the same time to launch NTR’s menu
  7. 启用debugger，并关闭菜单
  8. Use your router’s web page to get your device’s IP address (google it if you don’t know how, all routers are different)
  9. 在你的电脑上运行NTR Debugger
  10. Enter the following commands (replace XXX.XXX.XXX.XXX with your device’s IP address and YYY.YYY.YYY.YYY with your computer’s IP address)
    • connect("XXX.XXX.XXX.XXX", 8000)
    • write(0x15E424, tuple(map(ord, "http://YYY.YYY.YYY.YYY/update.php\0")), pid=0x25)
    • write(0x15E0EC, tuple(map(ord, "http://YYY.YYY.YYY.YYY/update.php\0")), pid=0x25)
    • write(0x15E463, tuple(map(ord, "http://YYY.YYY.YYY.YYY/update.php\0")), pid=0x25)
  11. Update your device by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”

Continue to Installing boot9strap (Homebrew Launcher)